Using the Setup Assistant
Click each step to see the action, click the picture or use the arrow keys
The Setup Assistant will guide you through the setup process for your phone
- 1.
Press and hold the Power/Lock Key to turn the phone on
- 2.
Tap the language
- 3.
Tap the language you wish to use
- 4.
Tap Start
- 5.
If you would like to connect to Wi-Fi, tap the network you wish to join
- 6.
If required, enter the network’s password and then tap Connect
- 7.
If you would like to transfer data from your Google account, tap Next. In this example, we will set the phone up as new and will select Don’t Copy
- 8.
To add your Google account, tap E-mail or Phone
If you do not have a Google account, you can tap Skip, or tap Create Account to set one up
- 9.
Enter the e-mail address or phone number associated with your Google account and then tap the Arrow
- 10.
Enter your password and then tap Next
- 11.
Tap I Agree
- 12.
Scroll down and tap Accept
- 13.
To add fingerprint unlock, tap Set-Up
- 14.
Enter a PIN and then tap Next. This is used in the event that your fingerprint cannot be read or additional verification is required. It must be at least 4 digits long
- 15.
Re-enter the PIN and then tap Confirm
- 16.
Place your finger on the fingerprint sensor
- 17.
Tap Start
- 18.
Continue to lift and replace your finger, adjusting its position slightly each time, until your fingerprint has been fully read
- 19.
If you would like to add more fingerprints, tap Add Another. Otherwise, tap Done
- 20. Tap Continue
- 21.
Tap I Agree to be able to access Google Assistant with voice match
- 22.
Follow the instructions to register your voice
- 23.
Tap Continue
- 24.
If you would like to add Google Pay, tap Add a Card. Otherwise, tap Skip
- 25.
If you would like to set up anything else, tap on a setting to change it. Otherwise tap No Thanks
- 26.
Tap Accept and Continue
- 27.
Select if you would like to receive email updates from Motorola and then tap Next